Metal Forming

Micro Metal Forming  eBooks & eLearning

Posted by AvaxGenius at April 7, 2022
Micro Metal Forming

Micro Metal Forming by Frank Vollertsen
English | PDF | 2013 | 443 Pages | ISBN : 3642309151 | 13.6 MB

Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given:

Cold Micro Metal Forming  eBooks & eLearning

Posted by AvaxGenius at May 3, 2020
Cold Micro Metal Forming

Cold Micro Metal Forming: Research Report of the Collaborative Research Center “Micro Cold Forming” (SFB 747), Bremen, Germany by Frank Vollertsen
English | EPUB | 2020 | 370 Pages | ISBN : 3030112799 | 95.87 MB

This book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Sheet Bulk Metal Forming: Research Results of the TCRC73 (Repost)  eBooks & eLearning

Posted by AvaxGenius at Nov. 16, 2022
Sheet Bulk Metal Forming: Research Results of the TCRC73 (Repost)

Sheet Bulk Metal Forming: Research Results of the TCRC73 by Marion Merklein
English | PDF | 2021 | 601 Pages | ISBN : 303061901X | 176.3 MB

The book discusses the challenges posed by simulating sheet–bulk metal forming. It takes into account the different phenomena characteristic to both sheet and bulk forming fields, and explores the demands this makes on modelling the processes. It then summarizes the research, and presents from a practitioner's point of view. This means the book is of interest to and helps both academics and industrial engineers within the field of sheet–bulk metal forming.

Cold Micro Metal Forming (Repost)  eBooks & eLearning

Posted by AvaxGenius at Dec. 12, 2023
Cold Micro Metal Forming (Repost)

Cold Micro Metal Forming: Research Report of the Collaborative Research Center “Micro Cold Forming” (SFB 747), Bremen, Germany by Frank Vollertsen
English | EPUB | 2020 | 370 Pages | ISBN : 3030112799 | 95.87 MB

This book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Sheet Bulk Metal Forming: Research Results of the TCRC73 (Repost)  eBooks & eLearning

Posted by AvaxGenius at Oct. 27, 2023
Sheet Bulk Metal Forming: Research Results of the TCRC73 (Repost)

Sheet Bulk Metal Forming: Research Results of the TCRC73 by Marion Merklein
English | PDF | 2021 | 601 Pages | ISBN : 303061901X | 176.3 MB

The book discusses the challenges posed by simulating sheet–bulk metal forming. It takes into account the different phenomena characteristic to both sheet and bulk forming fields, and explores the demands this makes on modelling the processes. It then summarizes the research, and presents from a practitioner's point of view. This means the book is of interest to and helps both academics and industrial engineers within the field of sheet–bulk metal forming.

Sheet Bulk Metal Forming: Research Results of the TCRC73  eBooks & eLearning

Posted by arundhati at Nov. 4, 2020
Sheet Bulk Metal Forming: Research Results of the TCRC73

Marion Merklein, A. Erman Tekkaya, "Sheet Bulk Metal Forming: Research Results of the TCRC73"
English | ISBN: 303061901X | 2021 | 601 pages | PDF | 176 MB

Cold Micro Metal Forming (Repost)  eBooks & eLearning

Posted by AvaxGenius at Aug. 14, 2022
Cold Micro Metal Forming (Repost)

Cold Micro Metal Forming: Research Report of the Collaborative Research Center “Micro Cold Forming” (SFB 747), Bremen, Germany by Frank Vollertsen
English | EPUB | 2020 | 370 Pages | ISBN : 3030112799 | 95.8 MB

This book contains the research report of the Collaborative Research Center “Micro Cold Forming” (SFB 747) of the University of Bremen, Germany. The topical research focus lies on new methods and processes for a mastered mass production of micro parts which are smaller than 1mm (by forming in batch size higher than one million). The target audience primarily comprises research experts and practitioners in production engineering, but the book may also be of interest to graduate students alike.

Sheet Metal Forming: Fundamentals  eBooks & eLearning

Posted by arundhati at May 14, 2020
Sheet Metal Forming: Fundamentals

Edited by Taylan Altan and Erman Tekkaya, "Sheet Metal Forming: Fundamentals"
English | ISBN: 1615038426 | 2012 | 350 pages | PDF | 18 MB

Advances in Metal Forming: Expert System for Metal Forming (Repost)  eBooks & eLearning

Posted by DZ123 at July 30, 2019
Advances in Metal Forming: Expert System for Metal Forming (Repost)

Rahulkumar Shivajirao Hingole, "Advances in Metal Forming: Expert System for Metal Forming"
English | 2014 | ISBN: 3662444968 | PDF | pages: 126 | 4.5 mb

Fundamentals Of: Metal Forming Machines And Processes  eBooks & eLearning

Posted by ELK1nG at Feb. 10, 2023
Fundamentals Of: Metal Forming Machines And Processes

Fundamentals Of: Metal Forming Machines And Processes
Published 2/2023
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 778.19 MB | Duration: 1h 9m

Learning the Concepts, Tools and Techniques