Dwdm

All you require to start with DWDM Technology, fundamentals, components: Mux/Demux, ROADMS, Amplifiers, transponders etc

Fundamentals of DWDM Network and its components i.e. transponders,muxponders, switchponders,Amps,mux/demux, ROADM

In order to adapt to the ever-increasing demands of telecommunication needs, today’s network operators are implementing 100 Gb/s per dense wavelength division multiplexing (DWDM) channel transmission. At those data rates, the performance of fiberoptic communication systems is degraded significantly due to intra- and inter-channel fiber nonlinearities, polarization-mode dispersion (PMD), and chromatic dispersion. In order to deal with those channel impairments, novel advanced techniques in modulation and detection, coding and signal processing are needed.

PSTN, Voice Over IP Systems (Softswitch, IMS), Internet, Mobile/cellular systems, Optical Fiber Systems (OFAN, DWDM)

Get to know more about transmission medium and technologies used in telecom networks

Since the advent of optical communications, a greattechnological effort has been devoted to the exploitation of the huge bandwidth of optical fibers. Sta- ing from a few Mb/s single channel systems, a fast and constant technological development has led to the actual 10 Gb/s per channel dense wavelength - vision multiplexing (DWDM) systems, with dozens of channels on a single fiber. Transmitters and receivers are now ready for 40 Gb/s, whereas hundreds of channels can be simultaneously amplified by optical amplifiers. Nevertheless, despite such a pace in technological progress, optical c- munications are still in a primitive stage if compared, for instance, to radio communications: the widely spread on-off keying (OOK) modulation format is equivalent to the rough amplitude modulation (AM) format, whereas the DWDM technique is nothing more than the optical version of the frequency - vision multiplexing (FDM) technique. Moreover, adaptive equalization, ch- nel coding or maximum likelihood detection are still considered something “exotic” in the optical world. This is mainly due to the favourable char- teristics of the fiber optic channel (large bandwidth, low attenuation, channel stability, …), which so far allowed us to use very simple transmission and detection techniques.